Large site with faceted navigation using rel=canonical, but Google still has issues
-
First off, I just wanted to mention I did post this on one other forum so I hope that is not completely against the rules here or anything. Just trying to get an idea from some of the pros at both sources. Hope this is received well. Now for the question.....
"Googlebot found an extremely high number of URLs on your site:"
Gotta love these messages in GWT. Anyway, I wanted to get some other opinions here so if anyone has experienced something similar or has any recommendations I would love to hear them.
First off, the site is very large and utilizes faceted navigation to help visitors sift through results. I have implemented rel=canonical for many months now to have each page url that is created based on the faceted nav filters, push back to the main category page. However, I still get these damn messages from Google every month or so saying that they found too many pages on the site. My main concern obviously is wasting crawler time on all these pages that I am trying to do what they ask in these instances and tell them to ignore and find the content on page x.
So at this point I am thinking about possibly using robots.txt file to handle these, but wanted to see what others around here thought before I dive into this arduous task. Plus I am a little ticked off that Google is not following a standard they helped bring to the table.
Thanks for those who take the time to respond in advance.
-
Yes that's a different situation. You're now talking about pagination, which quite rightly, canonicals to parent page is not to be used.
For faceted/filtered navigation it seems like canonical usage is indeed the right way to go about it, given Peter's experience just mentioned above, and the article you linked to that says, "...(in part because Google only indexes the content on the canonical page, so any content from the rest of the pages in the series would be ignored)."
-
As for my situation it worked out quite nicely, I just wasn't patient enough. After about 2 months the issue corrected itself for the most part and I was able to reduce about a million "waste" pages out of the index. This is a very large site so losing a million pages in a handful of categories helped me gain in a whole lot of other areas and spread the crawler around to more places that were important for us.
I also spent some time doing some restructuring of internal linking from some of our more authoritative pages that I believe also assisted with this, but in my case rel="canonical" worked out pretty nicely. Just took some time and patience.
-
I should actually add that Google doesn't condone using rel-canonical back to the main search page or page 1. They allow canonical to a "View All" or a complex mix of rel-canonical and rel=prev/next. If you use rel-canonical on too many non-identical pages, they could ignore it (although I don't often find that to be true).
Vanessa Fox just did a write-up on Google's approach:
http://searchengineland.com/implementing-pagination-attributes-correctly-for-google-114970
I have to be honest, though - I'm not a fan of Google's approach. It's incredibly complicated, easy to screw up, doesn't seem to work in all cases, and doesn't work on Bing. This is a very complex issue and really depends on the site in question. Adam Audette did a good write-up:
http://searchengineland.com/five-step-strategy-for-solving-seo-pagination-problems-95494
-
Thanks Dr Pete,
Yes I've used meta no-index on pages that are simply not useful in any way shape or form for Google to find.
I would be hesitant noindexing my filters in question, but it sounds promising that you are backing the canonical approach and there is a latency on reporting. Our PA and DA is extremely high and we get crawled daily, so curious about your measurement tip (inurl) which is a good one!
Many thanks.
Simon
-
I'm working on a couple of cases now, and it is extremely tricky. Google often doesn't re-crawl/re-cache deeper pages for weeks or months, so getting the canonical to work can be a long process. Still, it is generally a very effective tag and can happen quickly.
I agree with others that Robots.txt isn't a good bet. It also tends to work badly with pages that are already indexed. It's good for keeping things out of the index (especially whole folders, for example), but once 1000s of pages are indexed, Robots.txt often won't clean them up.
Another option is META NOINDEX, but it depends on the nature of the facets.
A couple of things to check:
(1) Using site: with inurl:, monitor the faceted navigation pages in the Google index. Are the numbers gradually dropping? That's what you want to see - the GWT error may not update very often. Keep in mind that these numbers can be unreliable, so monitor them daily over a few weeks.
(2) Are there are other URLs you're missing? On a large, e-commerce site, it's entirely possibly this wasn't the only problem.
(3) Did you cut the crawl paths? A common problem is that people canonical, 301-redirect, or NOINDEX, but then nofollow or otherwise cut links to those duplicates. Sounds like a good idea, except that the canonical tag has to be crawled to work. I see this a lot, actually.
-
Did you find a solution for this? I have exactly the same issue and have implemented the rel canonical in exactly the same way.
The issue you are trying to address is improving crawl bandwidth/equity by not letting Google crawl these faceted pages.
I am thinking of Ajax loading in these pages to the parent category page and/or adding nofollow to the links. But the pages have already been indexed, so I wonder if nofollow will have any effect.
Have you had any progress? Any further ideas?
-
Because rel canonical does nothing more than give credit to teh chosen page and aviod duplicat content. it does not tell the SE to stop indexing or redirect. as far as finding the links it has no affect
-
thx
-
OK, sorry I was thinking too many pages, not links.
using no-index will not stop PR flowing, the search engine will still follow the links. -
Yeah that is why I am not real excited about using robots.txt or even a no index in this instance. They are not session ids, but more like:
www.example.com/catgeoryname/a,
www.example.com/catgeoryname/b
www.example.com/catgeoryname/c
etc
which would show all products that start with those letters. There are a lot of other filters too, such as color, size, etc, but the bottom line is I point all those back to just www.example.com/categoryname using rel canonical and am not understanding why it isn't working properly.
-
There are a large number of urls like this because of the way the faceted navigation works and I have considered no index, but somewhat concerned as we do get links to some of these urls and would like to maintain some of that link juice. The warning shows up in Google Webmaster tools when Googlebot finds a large number of urls. The rest of the message reads like this:
"Googlebot encountered extremely large numbers of links on your site. This may indicate a problem with your site's URL structure. Googlebot may unnecessarily be crawling a large number of distinct URLs that point to identical or similar content, or crawling parts of your site that are not intended to be crawled by Googlebot. As a result Googlebot may consume much more bandwidth than necessary, or may be unable to completely index all of the content on your site."
rel canonical should fix this, but apparently it is not
-
Check how you are getting these pages.
Robots.txt is not an ideal solution. If Google finds pages in other places, still these pages will be crawled.
Normally print pages won't have link value and you may no index them.
If there are pages with session ids or campaign codes, use canonical if they have link value. Otherwise no index will be good.
-
the rel canonical with stop you getting duplicate content flags, but there is still a large number of pages its not going to hide them.
I have never seen this warning, how many pages are we talking about?, either it is very very high, or they are confusing the crawler.You may need to no index them
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
If I have an https page with an http img that redirects to an https img, is it still considered by google to be a mixed content page?
With Google starting to crack down on mixed content I was wondering, if I have an https page with an http img that redirects to an https img, is it still considered by Google to be a mixed content page? e.g. In an old blog article, there are images that weren't updated when the blog migrated to https, but just 301ed to new https images. is it still considered a mixed content page?
Algorithm Updates | | David-Stern0 -
Why google is not visiting any website from past 10 days
Hi, I observed why Google is not visiting www.SubhaVastu.com from past 10 days, later I checked thoroughly, not only for my site, google stopped visiting all websites from past 10/12 days. Is Google releasing any new updates to the crawler? Any new system is releasing soon. I am expecting Google updated their crawler by this Sunday night and it may visit as usual to all sites from 12-midnight pacific time. Has anyone observed it, any information regarding on this Google step. Thanks.
Algorithm Updates | | SubhaVaastu0 -
Do pages with canonicals need meta data?
Page A has a canonical to Page B. Should Page A have meta data values such as description, keywords, dublin core values, etc.? If yes, should the meta data values be different on Page A and Page B?
Algorithm Updates | | Shirley.Fenlason1 -
Google search analytics position - how is it worked out
In our Google search analytic s graphs total clicks and impressions appear as a sold line on the graph(ie showing a result for each day) Position only shows as an occasional dot or line - not a continuous result for each day) sometimes there are days with no result for position. How do google get these results
Algorithm Updates | | CostumeD0 -
Are Google algos different between .co.uk and .com?
I have a site that is starting to rank well (top 10 to top 50) for dozens of keywords in Google.co.uk but very little traction in .com. Google.com is the primary market. Webmaster tools is set to US, less than 1% of links to the site are the UK TLD or hosted in the UK. Keywords I'm ranking for in UK are medium to high competition with up to 16k exact search volume per month in the US. I just started to get ranked for these keywords in .co.uk in the past week, and I do rank for some long tail keywords in google.com. I have a handful of keywords ranking in google.ca and google.fr as well, but next to nothing for google.com. I have been building links for one month. I can think of a few possible explanations: - There is a delay in updating the rankings for Google.com and the rankings similar to my .co.uk rankings will come soon - Google.com vs .co.uk use a different algorithm - My site is penalized in .com only Of course, there is no way to be sure what the reason is, but what do you think is the most likely? Thanks!
Algorithm Updates | | kentaro-2569290 -
How Does Google Treat External Links to URLs with # Anchors?
Here are two URLs to explain this example: **Original URL: **example.com/1/ **URL that points to anchor within the webpage above: **example.com/1/#anchor Does Google treat these two URLs as separate entities or the same? For example, does an external link to the anchor URL pass full PageRank value to the original URL? How does Google handle this? Is there anything negative about this situation? Are there any risks associated with links to the anchor URL? Finally, is it more valuable for an external link to point to the URL without an anchor?
Algorithm Updates | | SAMarketing0 -
Webpage is ranking on google.ie / google.co.uk but not google.com?
One of our site webpage appears to be found in the first few pages on google.ie / google.co.uk but not on google.com. Is there such a thing being penalised on a specific Google domain? Traffic is healthy despite this but I want to rank well for the page in google.com. Any ideas?
Algorithm Updates | | notnem0 -
Classifieds and Google Panda
It seems Google's Panda update is targetting low quality sites with little unique content (I know there's more to it than that). It makes sense that they may want to do this but what about classified sites. They may use some scraped content as well as unique ads, and the ads may lack content as they rely on the users writing the ads. However, they are helpful to the people that use classifieds. Because of these factors, these sites are suffering with the release of the latest Panda update. Any advice for classified sites and how they can combat the rankings drops???
Algorithm Updates | | Sayers0