Help with GA Filters - IP Addresses
-
I'm having a hard time filtering out both of the IP addresses at our office. One is easy with regular expressions, but the other one does not seem to be working.
Here are the two IP addresses:
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86
174.99.90.148I set up these two custom filters and neither worked for the longer IP address.
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148Would you please help steer me in the right direction? Thanks as always MOZ friends!
-
Figured it out fully! This is how I needed to write the filter to have both in a regular expression:
174.99.90.148|^2606:a000:4e2b:d500
Thanks again everyone for steering me in the right direction!
-
Not sure why, but it looks like we just have to have separate filters for ipv6 versus ipv4s... works that way, but not combined for whatever reason.
Thanks for the help everyone!
-
I would agree with Dmitrii again on this one. For ipv6 there shouldn't be a need for regex as there are no '.' characters and ':' does not cause a regex function. You might want to consider simply segmenting the ipv4 and ipv6 as two different filters? I know this defeats your purpose of using one filter to catch them all but the problem you are facing may be caused by trying to group ipv6 and ipv4 in the same filter.
Try doing them separately and let us know if that solves the issue of correctly filtering the ipv6 traffic while using the pipes to join multiple ipv6 in one filter.
-
If you are creating filter just for one IPv6, why to you use regular expression at all? Just input it as it is.
-
I'm no longer getting the error, but for whatever reason putting them together is not filtering them out. What it looks like I need to do is create a custom filter and determine how to put the ipv6 in as a regular expression, which I do not understand how to do. Do you know?
-
The solution Dmitrii proposed has also worked for me with no invalid IP address error.
Can you confirm that this is still not working for you and provide a screenshot if possible?
-
It worked for me. I just checked. Are you doing it in custom, rather than predefined?
-
When I put that in it tells me that it's an invalid IP address...
-
It should be
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148 -
It does work when I set up a predefined filter blocking IP, but only for that one ipv6 - when trying to add both it isn't working and I'm hoping to only have one filter that blocks multiple IPs... thoughts?
-
Again, is it working if you create a filter just for ipv6?
-
Basically, what I'm trying to do is build the functionality to have all of my IP addresses, both IPv4 and IPv6 in one GA filter. I selected a custom filter to exclude IP addresses that are equal to the below expression, but it's not working for the IPv6. Can someone tell me what's wrong with this setup?
174.99.90.148|2606:a000:4e2b:d500:8519:4fcb:8bf0:78d7
I'm pretty sure the regular expression is incorrect for the IPv6, but I don't know how to do it and cannot figure it out through research.
Thanks as always MOZ friends!
-
Well, try ipv6 by itself first. Make sure it's working, eliminate the variables, you know. If it works by itself, then you can start digging into regular expressions (even though it should be simple ipv6|ipv4 without escapes). Who knows - maybe fault is not in regular expressions, but address is wrong or something.
-
I'd like to put all of these IP addresses in one filter instead of several, which requires a regular expression. These IPs are ours, but I also want to add different partners' IP addresses on their sites. We work with about 50 different websites and I'm hoping to have this as just one of the filters. The regular expression works for the non-IPv6 (thanks!) IP, but the IPv6 one is not filtering.
Make sense? Thanks again for the help!
-
IPv6 is that long IP address.
Simply go to filters in GA, find predefined filter, choose exclude, choose "traffic from IP addresses" and paste your IP, which is 2606:a000:4e2b:d500:61d9:9d4e:c539:ea86.
-
Pardon the lack of knowing, but what is ipv6? How does that filter look in the GA filter? Thanks!
-
Hi there.
You should be able to exclude both IPs without any escaping. What I'd recommend is to create a filter just for ipv6 and see if exclusion works. Let me know if that works.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Funnel Problem in Google Analytics - Please help
Hello, I did set up a several funnel steps in my analytics account to get the funnel visualization report. But it's look fishy, something's clearly wrong that it shows only 10 visitors at the first step but actually more than 5k visitors has visited first goal page and followed through the another all steps. Everyday we are receiving 5k to 10k goal conversions but it not showing in the entire funnel steps through first step to last step. Please see the attached screenshot URL for funnel setup (Admin) and funnel visualization report comparing last two months traffic. Total goal conversions received 3,605 in last two months but in funnel chart (report) it showing only 2% conversions in last step. Anybody can tell me what is the problem with that or analytics not tracking properly?si65Y
Reporting & Analytics | | flightcentre200 -
How to interpret search "clicks" in GA?
I am trying to make some sense of the data in the "Landing Pages" report under "Search Engine Optimization" in GA versus the data under the "Landing Pages" report in "Behavior | Site Content". For example, the SEO report says my page http://www.asiantraveltips.com/blog/bangkok-skytrain-bts-mrt-lines/ received 22,000 search impressions in the past 30 days and 900 "clicks" (12.42%). What are these "clicks" when the Content "Landing Pages" report says the same page only got 382 "sessions" in the same period??? What are these "clicks" if not clicks on the search results link that should be reflected in landing page sessions on the corresponding page?
Reporting & Analytics | | Gavin.Atkinson0 -
How is this site being tracked in GA?
Hi, Bit of an unusual one this, so please bear with me. This site http://www.hayesandhurst.com/ is being tracked in Google Analytics but we're unsure as to how. To the best of our knowledge we haven't inserted the tracking ID into the theme options or the tracking code into the source - and yet it appears to be tracking successfully! I did send some instructions to the client to set up the Analytics account in their name - I fear they have added the code somewhere to the site, but we cannot see where! Perhaps via Google tag Manager?? As I say, an odd one this, but if anyone can shed any light on this mystery i'd be hugely grateful. The tracking ID is UA-64505394-1 for the record. Regards,
Reporting & Analytics | | nathangdavidson
Nathan0 -
Can you use an advance segment as a metric or dimension for another advance segment in GA?
I have 3 advanced segments set up: Branded keywords Non-branded keywords (all) irrelevant non-branded keywords. irrelevant non-branded keywords are keywords where the visitor is not ready to purchase. for example keywords including terms such as "ideas" or "how to".. these have generated 0 conversions for us, and I want to track these separately from keywords that have a chance in converting, since the conversion rate between the two groups vary a lot. for the advanced segment "branded" - i listed a listed of keywords pertaining to the company name - using includes, Matching regexp and | (pipe) between keywords for advanced segment "non-branded keywords" - i took the same list and excluded matching regexp | between keywords. **for advanced segments "irrelevant keywords" ** - i took one word as the keyword and used includes, contains, and the keywords.. using OR statement between keywords. pipe doesn't seem to work with the "contains", and only seems to work with "matching regexp". **What i want to do is excluded all items from "Irrelevant keywords" in advanced segment "Non-branded keywords". but i can't seem to exclude based on another custom segment. **nor can I list - [X statement OR (statement y OR statement Z OR statement AB)] any thoughts on handling this logic?
Reporting & Analytics | | S.S.N0 -
Using Filters On Google Analytics
Hi Guys, I am In need of some technical help with regards to Google analytics. One of my clients has a site providing HR Software on SaaS basis. The users login via the site for the various HR Tools. Obviously this is skewing the analytics data and showing 10,000+ extra visitors that actually don't exist. Now I understand i can add filters and exclude certain pages for instance the login page, however, some users will visit the home page then click login. How can I exclude them just to show new visitors to the site rather than users that are just trying to login. Hope this makes sense Neil
Reporting & Analytics | | nezona0 -
See which Google TLD organic traffic is coming from in GA
Hi all, I'm working with a client that is marketing to English speaking ex-pats in Thailand. I have a suspicion that many of these ex-pats are searching through google.com (or .co.uk) instead of google.co.th. In Google Analytics (or any other tracking tool), is there a way to see which country-specific Google domain organic searches are coming from? Thanks, Tim
Reporting & Analytics | | TimKelsey0 -
Show item status in GA - LIve vs sold vs unsold
Hi guys, I am working with SEO for an auction site with B2C and C2C. (similar to eBay) All item\products on our page have an unique url. The auction can last from hours to weeks.
Reporting & Analytics | | helgeolaussen
When the item is live, sold or (finished but)unsold it still has the same url.
So when I take a look at SEO traffic to items in Google Analytics, I can't tell if the item was live, sold or unsold at the time the user landed on the page. Which makes it diffucult to analyse the traffic. Is there anyway I can make GA show the status of the item for the time user landed on it? Best regards, Ceran0 -
Tracking visits who entered the site via subdomain in GA
Hello, Does anybody know how I can segment visits who entered my site via subdomain? For example: I want to know people who entered via subdomain.example.com/***** and not include people who entered via www.example.com Thanks in advance!
Reporting & Analytics | | A_Q0