Setting A Custom User Agent in Screaming Frog
-
Hi all,
Probably a dumb question, but I wanted to make sure I get this right.
How do we set a custom user agent in Screaming Frog? I know its in the configuration settings, but what do I have to do to create a custom user agent specifically for a website?
Thanks much!
- Malika
-
Setting a custom user agent determines things like HTTP/2 so there can be a big difference if you change it to something that might not take advantage of something like HTTP/2
Apparently, it is coming to Pingdom very soon just like it is to Googlebot
http://royal.pingdom.com/2015/06/11/http2-new-protocol/
This Is an excellent example of a user agent's ability to modify the way your site is crawled as well as how efficient it is.
https://www.keycdn.com/blog/https-performance-overhead/
It is important to note that we didn’t use Pingdom in any of our tests because they use Chrome 39, which doesn’t support the new HTTP/2 protocol. HTTP/2 in Chrome isn’t supported until Chrome 43. You can tell this by looking at the
User-Agent
in the request headers of your test results.Pingdom user-agent
Note: WebPageTest uses Chrome 47 which does support HTTP/2.
Hope that clears things up,
Tom
-
Hi Malika,
Think about screaming frog and what it has to detect in order to do that correctly it needs the correct user agent syntax for it will not be able to make a crawl that would satisfy people.
Using a proper syntax for a user agent is essential and I have tried to be non-technical in this explanation I hope it works.
the reason screaming frog needs the user agent because the user-agent was added to HTTP to help web application developers deliver a better user experience. By respecting the syntax and semantics of the header, we make it easier and faster for header parsers to extract useful information from the headers that we can then act on.
Browser vendors are motivated to make web sites work no matter what specification violations are made. When the developers building web applications don’t care about following the rules, the browser vendors work to accommodate that. It is only by us application developers developing a healthy respect
When the developers building web applications don’t care about following the rules, the browser vendors work to accommodate that. It is only by us application developers developing a healthy respect
It is only by us application developers developing a healthy respect for the standards of the web, that the browser vendors will be able to start tightening up their codebase knowing that they don’t need to account for non-conformances.
For client libraries that do not enforce the syntax rules, you run the risk of using invalid characters that many server side frameworks will not detect. It is possible that only certain users, in particular, environments would identify the syntax violation. This can lead to difficult to track down bugs.
I hope this is a good explanation I've tried to keep it very to the point.
Respectfully,
Thomas
-
Hi Thomas,
would you have a simpler tutorial for me to understand? I am struggling a bit.
Thanks heaps in advance
-
I think I want something that is dumbed down to my level for me to understand. The above tutorials are great but not being a full time coder, I get lost while reading those.
-
Hi Matt,
I havent had a luck with this one yet.
-
Hi Malika! How'd it go? Did everything work out?
-
happy I could be of help let me know if there's any issue and I will try to be of help with it. All the best
-
Hi Thomas,
That's a lot of useful information there. I will have a go on it and let you know how it went.
Thanks heaps!
-
please let me know if I did not answer the question or you have any other questions
-
this gives you a very clear breakdown of user agents and their set of syntax rules. The following is valid example of user-agent that is full of special characters,
read this please http://www.bizcoder.com/the-much-maligned-user-agent-header
user-agent: foo&bar-product!/1.0a$*+ (a;comment,full=of/delimiters
references but you want to pay attention to the first URL
https://developer.mozilla.org/en-US/docs/Web/HTTP/Gecko_user_agent_string_reference
| Mozilla/5.0 (X11; Linux i686; rv:10.0) Gecko/20100101 Firefox/10.0 |
http://stackoverflow.com/questions/15069533/http-request-header-useragent-variable
-
if you formatted it correctly see below
User-Agent = product *( RWS ( product / comment ) )
and it was received by your headers yes you could fill in the blanks and test it.
https://mobiforge.com/research-analysis/webviews-and-user-agent-strings
http://mobiforge.com/news-comment/standards-and-browser-compatibility
-
No, you Cannot just put anything in there. The site has to recognize it and ask why you are doing this?
I have listed how to build and already built in addition to what your browser will create by using useragentstring.com
Must be formatted correctly and have it work with a header it is not as easy as it sometimes seems but not that hard either.
You can make & use this to make your own from your Mac or PC
http://www.useragentstring.com/
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_11_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/53.0.2747.0 Safari/537.36
how to build a user agent
- https://developer.mozilla.org/en-US/docs/Web/HTTP/Gecko_user_agent_string_reference
- https://developer.mozilla.org/en-US/docs/Setting_HTTP_request_headers
- https://msdn.microsoft.com/en-us/library/ms537503(VS.85).aspx
Lists of user agents
https://support.google.com/webmasters/answer/1061943?hl=en
https://msdn.microsoft.com/en-us/library/ms537503(v=vs.85).aspx
-
Hi Thomas,
Thanks for responding, much appreciated!
Does that mean, if I type in something like -
HTTP request user agent -
Crawler access V2
&
Robots user agent
Crawler access V2
This will work too?
-
To crawl using a different user agent, select ‘User Agent’ in the ‘Configuration’ menu, then select a search bot from the drop-down or type in your desired user agent strings.
http://i.imgur.com/qPbmxnk.png
&
Video http://cl.ly/gH7p/Screen Recording 2016-05-25 at 08.27 PM.mov
Or
Also see
http://www.seerinteractive.com/blog/screaming-frog-guide/
https://www.screamingfrog.co.uk/seo-spider/user-guide/general/#user-agent
https://www.screamingfrog.co.uk/seo-spider/user-guide/
https://www.screamingfrog.co.uk/seo-spider/faq/
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
I've all the things set up, still keywords are not rankign anywhere in Google.
No results, only just a few - site:10stuffs.com All the search results can be visible through manual URL searching... No manual actions or any technical fault detected. I'm wondering what's wrong with my site and why It's not gelling on with the Google. 10stuffs.com
Intermediate & Advanced SEO | | stuffsurya0 -
Setting up redirects from non wordpress
Hi, we are rebuilding our site which was built on WordPress. The old permalink structure was /%post_id%/%postname%/ The new site is a custom build (not Wordpress), however, we are using WordPress for blog posts. The URL structure is www.customewebsite/blog/ As the custom site is not WordPress, we do not know how to create a redirect to push the WordPress url /%post_id%/ to the /blog section of the new site. What we currently get is page not found. Can anyone help with the htaccess redirect code? Many thanks one and all.
Intermediate & Advanced SEO | | Taiger0 -
Where/how do you set up 301 redirects when keeping the same domain and not preserving the filename?
Hi there, I'm just reaching to to ask for some help in understanding where 301 redirects should be set up on a website when keeping the same domain but not preserving the original filenames? Essentially what is happening is an old website is being completely overhauled and brought up to date from a technical and usability standpoint. While the SEO isn't great naturally many of the pages have been indexed by google over time. A few pages have decent statistics and I don't want to lose the juice from them, but they do still need a lot of improving. So my question is this, would all the redirection take place in the .htaccess file only in this case? From reading here on Moz I think this is the case, but I need to confirm that. I was reading this article which has thrown me slightly: https://mza.bundledseo.com/learn/seo/redirection but this seems more complex as the website was actually moving domains. Open to any insight and if you need further clarification or information let me know.
Intermediate & Advanced SEO | | SEODarren0 -
How to Set Up Canonical Tags to Eliminate Duplicate Content Error
Google Webmaster Tools under HTML improvements is showing duplicate meta descriptions for 2 similar pages. The 2 pages are for building address. The URL has several pages because there are multiple property listings for this building. The URLs in question are: www.metro-manhattan.com/601-west-26th-street-starrett-lehigh-building-contains-executive-office-space-manhattan/page/3 www.metro-manhattan.com/601-west-26th-street-starrett-lehigh-building-contains-executive-office-space-manhattan How do I correct this error using canonical tags? Do I enter the URL of the 1<sup>st</sup> page under “Canonical URL” under “Advanced” to show Google that these pages are one and the same? If so, do I enter the entire URL into this field (www.metro-manhattan.com /601-west-26th-street-starrett-lehigh-building-contains-executive-office-space-manhattan) or an abbreviated version (/601-west-26th-street-starrett-lehigh-building-contains-executive-office-space-manhattan)? Please see attached images. Thanks!! Alan rUspIzk 34aSQ7k
Intermediate & Advanced SEO | | Kingalan10 -
Rankings drop - we've added user reviews, are they causing over optimisation on page?
Hello Hopefully can get a few opinions on this. We've added some user reviews to our website for key products. We added these approximately 3-4 weeks ago. In the last week we've seen keyword rankings drop on the pages they've been added to. For example see: http://www.naturalworldsafaris.com/wildlife/primates.aspx This page ranked well for both gorilla safari and gorilla safaris but both terms have dropped considerably (12 to 20 checking Google UK on the Moz rank checker). Due to the formatting required for the Rich Snippets (and we have the user review stars in the SERPS) the term "Gorilla safari" is perhaps becoming a bit spammy on the page. Another example would be "Borneo holidays" (up and down in the SERPS between 12-18) on this page: http://www.naturalworldsafaris.com/destinations/far-east/borneo.aspx Do you feel that these fluctuations in keyword ranking could be to do with this? Thanks
Intermediate & Advanced SEO | | KateWaite0 -
User profile page optimisation - tips required
Hello, we have developed a network of medical professionals and our main goal on SEO is to rank on user names. I would like to use a profile [h**p://goo.gl/bUwFWW] i build in corporation with my client as sample and request any tips to increase ranking position of users profile page while searching for his name. Right now we list on 2nd page of google page. I would to know any specific tips / advices i miss out on page optimisation. Thanks in advance, C
Intermediate & Advanced SEO | | HaCos0 -
Help with setting up 301 redirects from /default.aspx to the "/" in ASP.NET using MasterPages?
Hi SEOMoz Moderators and Staff, My web developer and I are having a world of trouble setting up the best way to 301 redirect from www.tisbest.org/default.aspx to the www.tisbest.org since we're using session very heavily for our ASP.NET using MasterPages. We're hoping for some help since our homepage has dropped 50+ positions for all of our search terms since our first attempt at setting this up 10 days ago. = ( A very bad result. We've rolled back the redirects after realizing that our session system was redirecting www.tisbest.org back to www.tisbest.org/default.aspx?AutoDetectCookieSupport=1 which would redirect to a URL with the session ID like this one: http://www.tisbest.org/(S(whukyd45tf5atk55dmcqae45))/Default.aspx which would then redirect again and throw the spider into an unending redirect loop. The Google gods got angry, stopped indexing the page, and we are now missing from our previous rankings though, thankfully, several of our other pages do still exist on Google. So, has anyone dealt with this issue? Could this be solved by simply resetting up the 301 redirects and also configuring ASP.NET to recognize Google's spider as supporting cookies and thus not serving it the Session ID that has caused issue for us in the past? Any help (even just commiserating!) would be great. Thanks! Chad
Intermediate & Advanced SEO | | TisBest0 -
SEO friendly way to redirect users based on IP address
Hi There I have an issue where I need to redirect all visitors from a specific country to a sub-domain, which has content explaining to those users that our service is not offered in that country. I would like to know the most SEO friendly way to do this? Thanks Sadie
Intermediate & Advanced SEO | | dancape0