Are Incorrectly Set Up URL Rewrites a Possible Cause of Panda
-
On a .NET site, there was a url rewrite done about 2 years ago. From a visitor's perspective, it seems to be fine as the urls look clean. But, Webmaster tools reports 500 errors from time to time showing /modules/categories... and /modules/products.... which are templates and how the original urls were structured. While the developer made it look clean, I am concerned that he could have set it up incorrectly. He acknowledged that IIS 7 on a Windows server allows url rewrites to be set up, but the site was done in another way that forces the urls to change to their product name. So, he has believed it to be okay.
However, the site dropped significantly in its ranking in July 2013 which appears to be a Panda penalty. In trying to figure out if this could be a factor in why the site has suffered, I would like to know other webmasters opinions. We have already killed many pages, removed 2/3 of the index that Google had, and are trying to understand what else it could be.
Also, in doing a header check, I see that it shows the /modules/products... page return a 301 status. I assume that this is okay, but wanted to see what others had to say about this.
When I look at the source code of a product page, I see a reference to the /modules/products...
I'm not sure if any of this pertains, but wanted to mention in case you have insight. I hope to get good feedback and direction from SEOs and technical folks
-
I don't think you understood the question as it didn't have much to do with links. This is related to a content management system which has an ugly url which a developer then took to make it more user friendly. While a user browsing the site sees clean URLs, webmaster tools reported 500 errors which are essentially server errors.
It doesn't seem those errors are in the console anymore. But, I was wondering if anyone has seen sites receive penalties because of a handful of 500 errors even though the site looks pretty good from a user perspective. (Note: the site is fairly large and a few 500 errors appeared).
-
Check your backlink profile - are there unnatural links? Are there sites which are spammy linking to you?
Get your site all working technically speaking, which it sounds like you have and then or at the same time check the links. I suspect you have some bad links which you are going to have to try to remove, or disavow.
Best of luck!
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Nofollow "print" URLs?
Hi there, Apols for the basic question but is it considered good practice to nofollow one of one's own URLs? Basically our 'print page' command produces an identical URL in the same window but with .../?print=1 at the end. As far as I've been reading, the nofollow html attribute is, broadly speaking, only for links to external websites you don't want to vouch for or internal links to login/register pages that together with noindex, you're asking Google not to waste crawl budget on. (The print page is already noindexed so we're good there) Can anyone confirm the above from their own experience? Thanks so much!
Intermediate & Advanced SEO | | Daft.ie0 -
URL Parameters Settings in WMT/Search Console
On an large ecommerce site the main navigation links to URLs that include a legacy parameter. The parameter doesn’t actually seem to do anything to change content - it doesn’t narrow or specify content, nor does it currently track sessions. We’ve set the canonical for these URLs to be without the parameter. (We did this when we started seeing that Google was stripping out the parameter in the majority of SERP results themselves.) We’re trying to best strategize on how to set the parameters in WMT (search console). Our options are to set to: 1. No: Doesn’t affect page content’ - and then the Crawl field in WMT is auto-set to ‘Representative URL’. (Note, that it's unclear what ‘Representative URL’ is defined as. Google’s documentation suggests that a representative URL is a canonical URL, and we've specifically set canonicals to be without the parameter so does this contradict? ) OR 2. ‘Yes: Changes, reorders, or narrows page content’ And then it’s a question of how to instruct Googlebot to crawl these pages: 'Let Googlebot decide' OR 'No URLs'. The fundamental issue is whether the parameter settings are an index signal or crawl signal. Google documents them as crawl signals, but if we instruct Google not to crawl our navigation how will it find and pass equity to the canonical URLs? Thoughts? Posted by Susan Schwartz, Kahena Digital staff member
Intermediate & Advanced SEO | | AriNahmani0 -
Attack of the dummy urls -- what to do?
It occurs to me that a malicious program could set up thousands of links to dummy pages on a website: www.mysite.com/dynamicpage/dummy123 www.mysite.com/dynamicpage/dummy456 etc.. How is this normally handled? Does a developer have to look at all the parameters to see if they are valid and if not, automatically create a 301 redirect or 404 not found? This requires a table lookup of acceptable url parameters for all new visitors. I was thinking that bad url names would be rare so it would be ok to just stop the program with a message, until I realized someone could intentionally set up links to non existent pages on a site.
Intermediate & Advanced SEO | | friendoffood1 -
Best to Fix Duplicate Content Issues on Blog If URLs are Set to "No-Index"
Greetings Moz Community: I purchased a SEMrush subscription recently and used it to run a site audit. The audit detected 168 duplicate content issues mostly relating to blog posts tags. I suspect these issues may be due to canonical tags not being set up correctly. My developer claims that since these blog URLs are set to "no-index" these issues do not need to be corrected. My instinct would be to avoid any risk with potential duplicate content. To set up canonicalization correctly. In addition, even if these pages are set to "no-index" they are passing page rank. Further more I don't know why a reputable company like SEMrush would consider these errors if in fact they are not errors. So my question is, do we need to do anything with the error pages if they are already set to "no-index"? Incidentally the site URL is www.nyc-officespace-leader.com. I am attaching a copy of the SEMrush audit. Thanks, Alan BarjWaO SqVXYMy
Intermediate & Advanced SEO | | Kingalan10 -
Urls in Bilingual websites
1-I have a bilingual website. Suppose that I am targeting a page for keyword "book" and I have included it in that page url for the English version: English version: www.abc.com/book Can I use the translation of "book" in the second language of the website url instead of "book" ? Please let me know which of the following urls are right " French Verison: www.abc.com/fr/book or www.abc.com/fr/livre livre=Book in French 2- Does Google have any tool to check if the second language page of the website has exactly the same content as the English version. What I want to do is for example for a certain page in English version, my targeted keyword is "book" . So my content would be around books. But in the French version of this page, I want to focus on keyword "Pencil" in French instead of "book". Is it wrong or any consequences? That was the main reason for the question number one. Because if it is ok to do what I explained in item 2 then I will set my urls like: In English : www.abc.com/book In French: www.abc.com/fr/crayon crayon=Pencil in French
Intermediate & Advanced SEO | | AlirezaHamidian0 -
URL Keyword Structure and Importance
Hey Guys, I've done quite a bit of research on this but still can't decide what the correct answer is, so was hoping the Moz community might be able to give some clarification. Say I have a URL **www.yourdomain.com/product/domain-names **is there any benefit in changing my site's backend structure (a relatively lengthly process) so the URL can read **www.yourdomain.com/domain-names **without the 'product' slug? I understand keywords in the URL can have a small impact on SEO, but does the positioning to this degree play any part? Any advice would be great.
Intermediate & Advanced SEO | | paragongroup
Cheers.0 -
Canonical URLs and Sitemaps
We are using canonical link tags for product pages in a scenario where the URLs on the site contain category names, and the canonical URL points to a URL which does not contain the category names. So, the product page on the site is like www.example.com/clothes/skirts/skater-skirt-12345, and also like www.example.com/sale/clearance/skater-skirt-12345 in another category. And on both of these pages, the canonical link tag references a 3rd URL like www.example.com/skater-skirt-12345. This 3rd URL, used in the canonical link tag is a valid page, and displays the same content as the other two versions, but there are no actual links to this generic version anywhere on the site (nor external). Questions: 1. Does the generic URL referenced in the canonical link also need to be included as on-page links somewhere in the crawled navigation of the site, or is it okay to be just a valid URL not linked anywhere except for the canonical tags? 2. In our sitemap, is it okay to reference the non-canonical URLs, or does the sitemap have to reference only the canonical URL? In our case, the sitemap points to yet a 3rd variation of the URL, like www.example.com/product.jsp?productID=12345. This page retrieves the same content as the others, and includes a canonical link tag back to www.example.com/skater-skirt-12345. Is this a valid approach, or should we revise the sitemap to point to either the category-specific links or the canonical links?
Intermediate & Advanced SEO | | 379seo0 -
Should I change wordpress urls?
Should I change my wordpress permalinks to include the keyword? For examples at the minute my url is http://www.musicliveuk.com/home/wedding-singer. Is it better to be http://www.musicliveuk.com/live-bands/wedding-singer. 'home' is not relevant so surely 'live-bands' would be better? If I change the urls won't I lose 'link juice' as external links will all point to a url that no longer exists? Or will wordpress automatically redirect the old url to the new one? Finally, if I should change the url as described how do I do it on wordpress? I can only see how to edit the last bit of the url and not the middle bit.
Intermediate & Advanced SEO | | SamCUK0